
EESA Engage · Issue #1 · April 2025
Understanding the Differences Between D8, D8+, and C1 Hoists
By Avishkar Tendle
The differences between what qualifies a hoist as D8, D8+, and C1 are best understood by imagining the three distinct scenarios they intend to address by reducing the risk of overhead use.
D8: The hoists are parked (de-energized, not moving). Additional rigging attachments are installed as a secondary means of supporting the load.
D8+: The hoists are parked. The load is suspended solely by the hoists. No movement of the hoist takes place while people are under the loads.
C1: The hoists are in operation while people are under the load.
These three scenarios all correlate to the potential for an accident, resulting in injury or death. For the purposes of these requirements, there is no distinction between who is in danger, whether they are technicians, performers, or the general public.
The D8 and D8+ chain hoist share the high quality construction of all CM hoists, but must be used properly depending on your rigging scenario. Safety is always the top priority.
As published in EESA Engage · Issue #1 (April 2025): read the issue.